We ship throughout all of Europe and the expected delivery time is approximately a week after the order is placed.
Orders above 50 Euros will be shipped free of charge.
For Orders under 50 Euros the shipping cost will be as following:
Denmark, Austria, Belgium, Bulgaria, Czech Republic, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Monaco, Netherlands, Norway, Poland, Portugal, Romania, Spain, Sweden, United Kingdom, Andorra, Liechtenstein, Slovakia, Slovenia, Switzerland.
The article number consist of four digits. I.e 2010 for Eos Medium White.
On the back of the product packing you will find a bar code in the bottom right corner.
The article number is part of the bar code in the last 5 digits, where the last number is random. I.e 57103020520109
Alternatively, you can find the item number on our homepage by choosing the respective product under "Lighting " or "Furniture". The item number will be located at the bottom of the page as "product number". To avoid misunderstandings, please make sure to choose the correct sizes and colors.
All batch numbers are written on a small sticker. I.e Batch#12-34567
The batch number is located in different places depending on the product you have. Please select the product you wish to find the location of the batch-number for.
STRAIGHTEN OUT THE FEATHERS
Every Eos lampshade is unique in the way the feathers are displayed and small gaps may occur on the lampshade when you unpack your new product.
To even out the feathers and close the gaps, bend them with your fingers by squeezing and bending the feathers between your thumb and index finger until the gaps are closed and the feathers have the look you want.
Keep the lamp clean using a hair dryer on the coolest setting, 25 cm (10”) from the lamp and blow the loose dust from the feathers. Use a damp cloth for dust that is difficult to remove.
For more information, please see a detailed guide on our youtube channel:
Can I change the canopy driver for the Chimes?
Unfortunately, it is not possible to change the canopy driver for the Chimes. If you buy multiple chimes however, it is possible to link them together. More info can be found in the user guide.
What is the angle of light on 1x Chimes?
It has an even beam angle of around 135 degrees.
Is it possible to extend the cord(s) on Chimes / Chimes Cluster?
Since an extension would require that the shell gets dismantled to be able to replace the existing cord with a longer one, the answer is no.
I want to install Chimes / Chimes Cluster without the metal canopy (e.g. on a lighting track). Is this possible?
Overall this is not possible since the LED driver located inside the canopy must be between the main voltage from the power grid and the product.
Is it possible to shorten the cords on the Chimes?
Unfortunately, if the cords is wanted shorter you will need to contact a local electrician. We recommend that you put the excess cord inside the rosette. As the Chimes uses DC low voltage, there is no fear of overheating.
Is it possible to get a longer cable when I order the Asteria lamp?
Unfortunately, at the moment it is not possible to get the Asteria pendle with a longer cable.
Is Asteria compatible with DALI systems?
Currently the Asteria family are not compatible with DALI
Is it possible to shorten the cord on Asteria / Asteria mini?
Yes, this is possible, usually it’s enough to just loosen the strain relief located on the metal canopy, and then push the cord up into the canopy to the desired length, then re-tighten the strain relief afterwards. Alternatively, the strain relief can be loosened, and the cord can be uninstalled at the driver output side inside the canopy and shorten by cutting the cord, afterwards install it correctly into the driver again, also remember to re-tighten the strain relief – please seek professional assistance before doing this, as UMAGE do not take any responsibility for anything that are not displayed/explained in the user guide
How can I dim Asteria / Asteria mini / Asteria Up?
Please see next question regarding our recommended Asteria Dimmers.
If the LED lights is not working properly, is it possible to change the light?
It is not possible to change the LED light in our Asteria lamps. If you experience problems with the light of your Asteria lamp, please go to our Claim formula and write us your issue.
For our Danish customers we recommend the following dimmers:
SG LED lysdæmper LEDDIM 0-200W
Phillips LPS 100 DK (0-10volt control voltage)
LK FUGA® indsats lysdæmper TOUCH IR 350 UNI
LK FUGA® indsats lysdæmper MEK-S 300LR
LK FUGA® indsats lysdæmper MEK-S 300CR
LK FUGA® indsats lysdæmper LED-S 120 VA korresp.
LK FUGA® indsats lysdæmper LED 180 TOUCH IR
LK FUGA® indsats lysdæmper FUGA LED 250 TOUCH IR
For our Swedish customers we recommend the following dimmers:
LED-dimmer ABB 6253UJGL-214
LED-dimmer Elko RS 316 GLED
For our Norwegian customers we recommend the following dimmers:
RS16/316 GLED dimmer PH
Uniled+ 325 trykk/vri
For our German customers we recommend the following dimmers:
Busch-Jaeger 6523 U-102 - Dimmer flush mounted 2...200VA 6523 U-102
MERTEN MEG5170-0300 - Dimmer flush mounted 40...200VA - MEG5170-0300
MERTEN MEG5134-0000 - Dimmer flush mounted 4...400VA - MEG5134-0000
For our French customers we recommend the following dimmers:
Legrand interrupteur variateur 400w niloé blanc avec enjoliveur finition éclat leg96608
Arnould Ecovariateur 400W Espace evolution avec enjoliveur blanc a assembler
For our Dutch customers we recommend the following dimmers:
Tronix 215-131 LED Dimmer Universal | Trailing Edge | 10W ~ 350W
Busch-Jaeger 6523 U-102 - Dimmer flush mounted 2...200VA 6523 U-102
For our Swiss customers we recommend the following dimmer:
For our Finnish customers we recommend the following dimmers:
Schneider Electric Exxact vriddimmer LED 4-400W vit WDE008337
VALONSÄÄDIN ABB JUSSI LED 2-100VA 6523UJGL-214P
Many of these external dimmers have different “modes” to switch between, usually by a physical switch located on the dimmer itself – follow the user guide of the dimmer, and ensure all “modes” have been tested.
Unfortunately, we do not have a guide to extend the cord on any of the tripod/champagne models. If an extension is needed, please find an alternative way.
If you have placed an order that you wish to change or cancel, please contact us immediately at +45 31 39 31 31. If your order has shipped, you will receive a full refund for the value of the merchandise only (including applicable tax); shipping and handling costs will not be refunded.
If you are not satisfied with your purchase, simply return the unused item(s) to us in their original packaging within 14 days of receipt. The item must be returned in its original packaging with any enclosed documentation. We will issue a full refund (excluding original delivery charge) within 10 days after receipt. If the product is not in its original condition we will charge a handling fee of 25 Euro.
If you would like to return a product, send it to:
UMAGEKongens Nytorv 15DK-1050 Copenhagen KDenmark
Please include a note in your parcel with the following details: order number, name, address and telephone number.Please note that if you return merchandise without a receipt or invoice, we can only provide the last known value of the item in the form of a merchandise credit. Items should be returned in their original packaging. UMAGE will only pay the return shipping costs if the return is a result of our error or faulty products. UMAGE reserves the right to reject the returns of goods that are not returned in accordance with our Returns Policy and we may request that you pay for the shipping of such goods back to you.
If you are experiencing any problems with your UMAGE product and want to return it, please fill out our claim formular. It requires the follwoing information:
*Your e-mail address
*Your shipping address (in case we need to send spare parts or a replacement product
*Batch number (Batch#xx-xxxxx)
*Pictures of the damage
! - Please note that all information is required to improve the process time of your claim.
Terms and Conditions
All trademarks on this website are registered by UMAGE. All product designs and product names included on this website are protected by copyright and trademark laws. You are not permitted to use any product designs, product names or trademarks represented on this site without the prior written consent of UMAGE. UMAGE reserves all rights. This website and all contents there are protected by copyright laws, trademark laws and other applicable laws. You are not permitted to copy, reproduce, republish, upload, post, transmit or distribute in any way the contents of this website including all text, images and layout without the prior written consent of UMAGE.
Your personal information will not be shared, circulated, nor modified in any other way without your previous consent.
You can correct, or cancel your information at any time by contacting:
Kongens Nytorv 15
DK-1050 Copenhagen K
Tel. +45 31393131
We accept payment by PayPal, Visa, Visa Electron, MasterCard, Maestro and MobilePay.
Corporate Social Responsability
At UMAGE we recognize our Corporate Social Responsibility in every aspect of our global operations and we support the United Nations Development Goals.
We use flat packaged design in order to optimize our logistics and therefore minimize our environmental footprint. All of our suppliers have agreed to our Code of Conduct where they commit to the ethical and fair treatment of their worker and to ensure safe and healthy workplaces.
For our products we use recycled materials and repurposing of by-products. The latter is the case of our goose feathers used for our popular Eos feather lamps. All feathers used are a by-product of the food industry. Goose feathers that would otherwise be burned are instead sanitized and repurposed thus diminishing the environmental impact. UMAGE is required by law to document the origin and proper handling of all geese and feather and therefore none of our goose feathers is derived from live or mistreated geese.